Description
Fine-tune your turntable system with the Uphorik phono stage to get more from your vinyl collection.
Sharing the same dual mono topology and fully screened differential input as with Urika, the Uphorik phono stage offers both versatility and exceptional performance.
The most flexible phono stage available, Uphorik features separate dedicated inputs and circuits for moving magnet (MM) and moving coil (MC) cartridges, and has a full range of adjustments which allows you to easily optimise its settings to any cartridge, should you wish to upgrade in the future.
Uphorik’s flexibility also extends to connections. With a choice of balanced or unbalanced outputs, and RCA or XLR inputs, Uphorik is guaranteed to always meet your requirements, no matter how the rest of your system evolves.
Technical Specifications
Product Specifications:
Type RIAA pre-amplifier for MM and MC cartridges
Supported Cartridges Moving Magnet (MM) and Moving Coil (MC)
Clip Indicator Threshold Occurs at greater than +10 dBv output level
Input Connectors MM – 1 x L/R pair RCA and 1 x L/R pair XLR
MC – 1 x L/R pair RCA and 1 x L/R pair XLR
MM Gain +44 dB / +48 dB @ 1 kHz (measured using 20 Ω source into 47 k Ω)
MM Resistance 51 kΩ, 49 kΩ , 47 kΩ, 45 kΩ
MM Capacitance 68 pF, 105 pF, 135 pF, 175 pF, 215 pF, 255 pF, 285 pF, 325 pF
MC Gain +54 dB / +64 dB @ 1 kHz (measured using 20 Ω source into 1 k Ω)
MC Resistance (low) 31 Ω, 37 Ω, 42 Ω, 53 Ω, 70 Ω, 100 Ω, 170 Ω
MC Resistance (high) 580 Ω, 670 Ω, 810 Ω, 1 kΩ
MC Capacitance 470 pF, 1 nF, 1.5 nF, 2 nF
Line Outputs 1 x L/R pair RCA
1 x L/R pair XLR
Line Output Maximum output voltage 6 V RMS, 8.5 V Peak, +15.6 dBv (measured signal to screen)
Output Impedance: 300 Ω
XLR Output Maximum output voltage 12 V RMS, 17 V Peak, +21.6 dBv (measured signal to screen)
Output Impedance: 600 Ω
THD+N Better than 0.015 % MM -44 dBv input
Better than 0.015 % MC -64 dBv input
Signal to Noise Ratio Better than 105 dB MM Phono Input
Better than 105 dB MC Input
Channel Balance Better than ± 0.2 dB
Channel Separation Below the noise floor MM Input (left to right)
Below the noise floor MC Input (left to right)
Below the noise floor MM to MC Breakthrough
Frequency Response 2.5 Hz to 40 kHz (-3 dB) MM Phono Input
2.5 Hz to 40 kHz (-3 dB) MC Phono Input
RIAA Tracking ± 0.2 dB MM Input 20 Hz to 20 kHz
± 0.2 dB MC Input 20 Hz to 20 kHz
Mains Input voltage
(auto-sensing)
100 – 120 V
220 – 240 V
Mains Supply Frequency 50 – 60 Hz
Standby Power Consumption 11 W
Fuse Replacement 250 V, 200 mAL
Product Dimensions (H) 91 mm x (W) 380 mm x (D) 380 mm
(H) 3.58 inches x (W) 15 inches x (D) 15 inches
Shipping Dimensions H 220 mm x W 520 mm x D 490 mm
H 8.75 inches x W 20.25 inches x D 19.25 inches
Product Weight 4.4. kg / 9.8 lb
Shipping Weight 4.9 kg / 10.8 lb
